| After-sales Service: | 24hours on Line,Serve for You for Ever |
|---|---|
| Warranty: | 12 Months |
| Application: | Electronic Industry |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Equipment working principle and process:
When this machine works, when the preparatory work, that is, dust removal system, separator, elevator, spiral drum screen (especially suitable for castings, to prevent the castings on the flying edge of the burrs mixed into the steel shot inside, affecting the cleaning effect), drum rotation system, etc., in turn began to run, the equipment ready to work. First of all, the workpiece will be loaded into the front-end hopper (feeding methods are flexible, the line can be used vibrating conveyor or scale machine will be directly transported to the hopper, you can also use the workpiece turnover basket directly on the material), the workpiece through the feeding hopper lifting and dumping into the drum, the gate is automatically closed through the hydraulic cylinder, installed in the gate on the shot blasting machine to start the automatic opening of the gate valve for shot blasting to start on the workpiece! Shot blasting cleaning. The workpiece rotates with the drum, uniformly accept the projectile strikes to remove the surface of the workpiece oxide skin, welding slag, rust and dirt, etc., until it reaches the set time for shot blasting, shot blasting gate and shot blasting machine is closed, after the PLC delay, the workpiece will be mixed with the steel shot thoroughly out of the drum, the gate is automatically opened, the drum is tilted to slowly dump the workpiece, the lower end of the vibrating conveyor, sorting belt conveyor to take over (the way of material) (The flexible and diverse, but also for the use of the line provides a great convenience). Then repeat the feeding action. Repeat this process until the work is finished, according to the order of stopping.
| No . |
Item | Qty. | Specification | Remark |
| 1 | capacity | ≤0.06m3 and ≤120 kg | QGT700 | |
| 2 | workpiece | weight:≤10Kg L≤200mm 10mm≤∮≤150mm t≥5mm |
temperature:≤ 80ºC | |
| 3 | drum | 1 | φ700×800L(max) |
powder:0.37kw |
| 4 | Turning device |
1 | reducer:0.37KW-4 power:0.37kw |
|
| 5 | Turbine | 1 | Flow rate:80Kg/min Impeller rotate speed:3000rpm |
model:QY-30 Motor power:7.5kw-4P |
| 6 | Elevator | 1 | Lift capacity: 7.8t/h | power:1.5kw |
| 7 | Separator | 1 | Air speed:4-5m/min | Full curtain wind selection |
| 8 | Loading device | 1 | Electro-hydraulic push rod |
Motor power:1.5Kw |
| 90 | Unloading device | 1 | Vibrating chute | 2*0.15Kw |
| 10 | Screw conveyor | 1 | Convey capacity:7.2 t/h | reducer:0.25KW-4 power:0.25kw |
| 11 | Dust collector | 1 | Air pressure:245kPa Air volume : 600m3/h |
|
| 12 | Machine power | ~15KW |
){kind=link}