RUBBER INTERNAL MIXER/ BANBURY MACHINE/BANBURY MIXER
All our machines can be customized according to your requirements.
Application
The machine is applicable for plasticating and mixing rubber and plastics.
>> CHARACTERISTIC
1. The internal mixers of this adopt elliptical tangential rotors. The wings and working surfaces of the rotors, the internal surfaces of the mixing chamber, and the working surfaces of the pressing RAM device and the discharging device are all coated on with wearable hard alloy by built-up welding method, which are durable and corrosion proof and have a long service life.
2. The rotors, the mixing chamber and the discharging door are all structured with circulating channels to realize the circulation of heat transmission mediums. According to different processing requirements, the mixing materials may be heated by hot steam or cooled by cold water.
3. The mixing chamber is a combined configuration, which is convenient for assembling, disassembling and maintaining. The drop-door discharge device is driven by two reciprocating oil cylinder which directly pull the locking plate to lock the discharge door. The device provides fast discharging and reliable airproof.
4. The rotors are supported by rolling bearings, which are easy to maitain and have a long service life.
5. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life.
6. The pressing RAM device may be driven by pneumatic cylinder or oil cylinder to press onto the mixing materials to force them equally mixed so as to increase productive effciency. Mated with the electric controller, the pressing RAM device can automatically add pressure, release pressure or just keep floating.
7. Both manual and automatic modes are arranged to operate PLC electric system. It is easy to exchange the modes and reliable to operate the controller.
>>MAIN TECHNICAL SPECIFICATION
| Model |
X(S)M-80 |
X(S)M-110 |
X(S)M-160 |
X(S)M-250 |
X(S)M-270 |
X(S)M-420 |
| Total Volume of mixing chamber(L) |
80 (2-wings) |
120 (2-wings) |
147 (2-wings) |
253(2-wings) |
250(4-wings) |
425(4-wings) |
| Working capacity of mixing chamber(L) |
60 |
82.5 |
110 |
140 |
188 |
319 |
| Rotating speed of rear rotor(r/min) |
40 |
40 |
4-40 |
20() |
4-40(6-60) |
6-60 |
| Speed ratio of rotor |
1:1.15 |
1:1.15 |
1:1.16 |
1:1.16 |
1:1.17 or 1:1 |
1:1.15 or 1:1 |
| Pressure of compressed air(Mpa) |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
| Compressed air consume(m³/h) |
100 |
230 |
300 |
120 |
Hydraulic Ram |
Hydraulic Ram |
| Pressure of cooling water(Mpa) |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
| Cooling water consume(m³/h) |
25 |
35 |
45 |
23 |
100 |
150 |
| Motor Power(KW) |
220 |
(250)280 |
500 |
250 |
1250(1500) |
2x1250 |
| Overall dimension ( mm) |
5800x2560x4200 |
6620x2850x4400 |
8000x3300x5260 |
7100x3905x4953 |
8700x4320x6160 |
10800x4960x7040 |
| Weight ( T ) |
22 |
26 |
36 |
35 |
50 |
76 |
>> Company Information
1. 40 years on rubber machinery manufacturing and exporting.
2. Delivery within 30 days.
3. Safety wood or plywood crates packaging.
4. Full transportation insurance.
5. Sell to 126 countries on 6 continents.
>> LAB MACHINES
We had a lot of cooperation with East China University of Technology State Key Laboratory of Chemical Engineering, Qingdao university,Beijing chemical industry research institute ect. and supply the lab rubber machines.
>>MACHINE LIST
Our company specially manufacturring rubber mixing mill, rubber vulcanizing press( frame type, four column type and lab press), rubber kneader and tire recycling line.
>> AFTER SERVICES FOR THE PRESS
1. The above machines are all passed inspection of 3~5 hours of full load operation before leaving the factory, you can use it directly thus saving the time of test-run and expense.
2. Warranty: 12 months after installation, if our machines have any problems, you can feel free contact me, we will solve it as soon as possible, and give you the best services.
Delivery Demonstration
Some Exhibition Pictures
>>FAQ
1. Delivery time of the rubber machines?
This is specially designed machine according to your specific requirement.
From engineer designing to production completion, it needs about 25 to 35 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production.
Every machine will be fully assembled and carefully tested before shipment.
3. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
4. Are you able to give installation and commissioning overseas? How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days.
Big plant usually takes about 30 days.
5.How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order.
The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers. If you come to our factory, we can show you're the user around us.
6.How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport.
We will pick up you at the airport.
Audited Supplier 
){kind=link}
){kind=link}